EconoMelt™ 10 Hot Melt System1
2
Side view of EconoMelt™ 10 – Showing single hose connection panel.3
EconoMelt™ 10 with Lid open4
5
Industrial Strength Quality and Materials6
EconoHose7
EconoMelt™ 10 has a 10 lb. capacity Teflon lined tank.8
9
10
11
EconoMelt™ Shipping Crate (Stand not included)12
EconoChamp Handguns in Stock13
Econo Controller14
EconoChamp Handgun with Champ Boom and Tool Balancer15
EconoMelt™ with Econochamp Boom, Balancer and Hammock16
EconoGun™ Hot Melt Bead Gun17
EconoGun™ Mini Hot Melt Gun18
EconoMelt Handgun System with Boom and Balancer19
Champ 600 with boom and balancer20Compatible With:
All standard hot melt adhesives. (Quality Bulk Adhesives available from Glue Machinery Corporation™)Product Manuals / Related PDFs:
Manual available - Please callEconoMelt™ 10 Industrial Hot Melt Handgun System
Simple, low cost industrial hot melt tank with 10 lb capacity tank, high flow piston pump ability to operate one hose and handgun or one hose and automatic gun.
$
Product Videos (Click to View)
Bag-In-A-Box Gluing1 Extruding Dots for Conformal Coating2 Econochamp Dual Orifice Nozzle3 Applying PUR for Cabinet Building4 Gluing Wallboard5 Econochamp dots and lines6 Econochamp lines7 With Boom and Balancer8 Sealing Drums9 Inverted Nozzle Dispensing Wax10 High Output Piston Pump11 Hot Melt Gluing Tiles to Sample Boards12 Erect and Seal Large Box using hot melt adhesive13Product Details:
- 10 lb tank capacity.
- 7 to 15 lb / hour melting rate depending on system voltage and adhesive.
- Air powered piston pump.
- Max viscosity: 12,000 CPS
- Max Operation Temp: 220ºC/428ºF
- Dimensions: 16.93" x 13.39" x 28.74"
- 10 lbs per hour in 120 VAC and 15 lbs per hour in 240 VAC
- Operates with one 6 or 8’ hose in 120 “VAC and one 6, 8 or 12’ hose in 240 V
- Power Requirements: 120VAC= 16.6 amp/1ph/50-60Hz. 240VAC=8.33 amp/1ph/50-60Hz.
- Also available as a Swirl Spray System
- Maximum pump air consumption at 60PSI 1.4 SCFM (30 pump cycles per minute).
- The EconoMelt™ 10 utilizes analog temperature controllers and type k thermocouples. These analog temperature controllers are factory preset and calibrated to the thermocouple. These do not require re-calibration.
QUOTE THIS MACHINERY
EconoMelt™ 10 Industrial Hot Melt Handgun System
Call 1-410-761-2727Or Fill Out The Form Below